How do I inspect the battery on a home standby generator? FAQ’s

How do I inspect the battery on a home standby generator? FAQ’s

How do I inspect the battery on a home standby generator?

To inspect the battery on a Generac air-cooled Guardian Series (10-26kW) generator manufactured after 2017:

  1. Turn the generator OFF and remove the front panel and 7.5A fuse.
  2. Disconnect the battery cables and charger, clean terminals, and check cable tightness.
  3. For unsealed batteries, check fluid levels and top off with distilled water if needed.
  4. Reconnect the battery, charger, panels, and fuse, then clear any maintenance alarms.

Refer to your owner’s manual and consider having a Generac dealer inspect the battery if unsure.